Search:

Type: Posts; User: AllMotorNotch

Search: Search took 0.01 seconds.

  1. Replies
    3
    Views
    546

    oil breather??

    I've gotta push in edelbrock oil breather in my 1 valve cover but when i get on my car it blows some oil down my valve cover and onto the header. Should i try a different breather or any ideas you...
  2. Replies
    0
    Views
    224

    WTB 15x8 ProStars

    Lookin for a pair of 15x8 prostars. 5 1/2 backspace 5x4 1/2 bolt pattern. With or without tires, lemme know whatcha got

    kevin
  3. Thanks for the replies guys. We got mine and my...

    Thanks for the replies guys. We got mine and my buddys car straightened out after a bunch of advise. Basically just antisiezed everything, bolts, sleeves, bushing ends, and the ears on the k...
  4. Alright cool im gonna change out the springs...

    Alright cool im gonna change out the springs tomorrow and bump the fuel pressure a little and see how she acts. As for the timing, how do i get the total timing? I know with EFI when you put the...
  5. Timing, Fuel pressure and advance curve on my setup??

    Just recently getting most of the bugs worked out of my car and wanted to get some ideas on approx settings on this stuff. I have a 306 10:5.1 compression, ported twisted wedges, port matched victor...
  6. Question for guys runnin tubular front suspension

    I've got a PA Tubular K and A arms on my 93 coupe and i'm battlin a problem right now with the front suspension. When i lower the car off the lift the front end doesnt come down completely like the A...
  7. pm sent

    pm sent
  8. Replies
    0
    Views
    506

    ? on strut spacers with coilovers

    I just installed 90/10s, a MMR coilover kit and Steeda steel caster camber plates on my 93 tonite. Everything went alrite and the cars together and sits fine but i do have a question on the strut...
  9. Replies
    5
    Views
    397

    pretty sure its sold. ill let ya know

    pretty sure its sold. ill let ya know
  10. Replies
    5
    Views
    397

    email sent

    email sent
  11. Replies
    0
    Views
    254

    93 Mass air harness

    Gotta main engine harness out of a 93 5.0 & injector harness. No cut wires no missing connectors

    $100
  12. Replies
    5
    Views
    397

    MSD distributor for carbed 302

    MSD 8582 distributor for carb'd 5.0 In good shape just needs a distrib gear pressed on. I've gotta new MSD steel gear for it too.

    $100 without gear

    $150 with
  13. Replies
    1
    Views
    309

    WTB: Lakewood 90/10s

    Lookin for a set of 90/10s for 87-93. Prefer new or not real used. PM me with what ya got

    Kevin
  14. Replies
    8
    Views
    638

    Do you have the black carpeted piece behind the...

    Do you have the black carpeted piece behind the back seat and the black 3rd brake light?

    Kevin
  15. Anyone with front coilovers, Come In

    I'm ordering a set of front coilovers in about a week 14" 175# springs. Im looking for opinions on what caster/camber plates everyone is using with coilovers. I'm trying to stay away from the Maximum...
  16. Replies
    0
    Views
    318

    Maximum Motorsports C/C plates

    New C/C plates for 79-89, they'll work on 90-93 too but M.M. never told me what the diff was. They were bolted onto my 93 and then removed, never driven on or nothin. I got a coilover setup that came...
  17. Replies
    3
    Views
    320

    yep still got it, let me know if u have any...

    yep still got it, let me know if u have any questions

    Kevin
  18. Replies
    4
    Views
    492

    Nah Brian not sold exactly yet, if you dont end...

    Nah Brian not sold exactly yet, if you dont end up getting them I have someone else also local that definitely wants them so even though i have them now they are sold if you dont want them ya know
    ...
  19. Replies
    4
    Views
    492

    Sorry Outlaw sold em local Kevin

    Sorry Outlaw sold em local

    Kevin
  20. Replies
    3
    Views
    320

    N/A Powerpipe

    Brand new AFM powerpipe for 75 mm N/A mass air, comes with pipe, k&n and sleeves

    $150

    Kevin
    zipperbandit@hotmail.com
  21. Replies
    4
    Views
    492

    ProStar skinnys

    15x4 ProStars 5x4.5 bolt circle 195r15s with 90% tread left comes with caps and lugs

    $200 + shipping

    Kevin
    zipperbandit
  22. Replies
    0
    Views
    283

    Aeromotive fuel system

    brand new fuel system for 87-93

    Comes with Aeromotive A1000 pump, Aeromotive filter, In tank pickup, all braided line & fittings, Downs Y block, Aeromotive EFI Regulator, and Downs Rails. Also...
  23. Replies
    2
    Views
    420

    injector suggestions

    I have a 306 with ported twisted wedges, street heat intake, 70mm tb, custom grind with about .560 lift. I am runnin the aeromotive fuel system with braided line and the A1000 pump and i'm having...
  24. Replies
    1
    Views
    468

    Flaming River manual rack

    Brand new in the box Flaming River manual rack kit. Comes with tie rods, rack and steering shaft. Kit # FR1890, fits 79-93 stangs. Paid $440 new from Summit, everything is still in the box...
  25. Replies
    1
    Views
    656

    Building a C4 for 300-350 hp

    I want to try gettin my trans together soon so it's not the last thing i need to get my car done. My trans guy has a case fill 26 spline trans for me already so i'm tryin to go from there. I dont...
  26. Replies
    0
    Views
    504

    Will '69 C4 work?

    A buddy of mine is selling a C4, he says it's a '69, I thought only 70 and up would work on 5.0. Can anyone tell me for sure? Thanks in advance guys

    Kevin
  27. Replies
    0
    Views
    230

    WTB: Rust free GT Hatch

    Trying to get together the rest of the body parts I need to paint my 87 Hatch, I'm looking for a GT hatch and wing, doesnt matter what color but has to be rust free or have very minimal surface rust....
  28. Replies
    0
    Views
    228

    Russell stainless brake lines

    Russell stainless lines for 87-93, brand new in the box (2 front and 1 rear) $60

    Email me if interested

    Kevin
    zipperbandit@hotmail.com
  29. Replies
    0
    Views
    331

    New QA1 Tubular K

    New in Box QA1 Tubular K member, says it fits 79-95 5.0s $225 obo

    Email if interested

    Kevin
    zipperbandit@hotmail.com
  30. Replies
    1
    Views
    423

    Tubular A arms on street?

    Whats up guys, i finally got my replacement Visa card so I can call up Performance Automotive and order my K member I was gonna get tubular A arms with the K but a buddy of mine is tellin me I dont...
  31. Replies
    1
    Views
    393

    Coilovers on the street?

    Whats up guys. I've been tryin to order my tubular K for a while but keep runnin outta cash. Anyways what are everyones opinions of running coilovers up front on a street car? Thanks in advance.
    ...
  32. Replies
    4
    Views
    452

    Fuel system recommendations?

    Whats up guys. I'm in the middle of buildin up my car and I'm not sure which direction I should go with my fuel system. I've got a 306, ported TW heads, street heat intake, BBK L/Ts, 30lb injectors,...
  33. Replies
    5
    Views
    1,119

    Strengthening an 8.8??

    Once my car is finally up and running I'm gonna start to build up a rear but have a few questions...

    I'm gonna use 31 spline mosers and probably an Eaton posi. The cars gonna be mostly street...
  34. Replies
    2
    Views
    802

    After 5 lug swap what backspacing?

    Whats up guys. I'm gonna try to swap my hatch over to 5 lug this weekend with the 94 spindles i got and 5 lug ranger axles which'll be replaced with 31 spline Moser 5 lugs eventually. Anyways I dont...
  35. Should I upgrade to 31 spline? (long)

    Alright, I'm tryin to set up the rear for my car before i drop the motor in. I dont have an honest # on hp but just a 306 w/TW heads, street heat and some porting. Down the road I might spray it with...
  36. Replies
    0
    Views
    444

    Brand new BBK unequal shortys

    I gotta set of 1 5/8 ceramic coated BBK unequal shortys. Bolted them to the motor and decided to switch over to longtubes. Would like to get $200 shipped for em. Summit part #BBK15150 Email me if...
  37. Replies
    7
    Views
    1,005

    Anyone run an elec fuel press gauge?

    I'm going to order my 3 gauges soon and was planning on getting a triple gauge cage and mounting them all inside (water temp, oil press, fuel press) I would rely on a mechanical fuel press gauge but...
  38. Replies
    8
    Views
    1,244

    http://forums.stangnet.com/attachment.php?s=&posti...

    http://forums.stangnet.com/attachment.php?s=&postid=1921380
  39. Replies
    8
    Views
    1,244

    http://forums.stangnet.com/attachment.php?s=&posti...

    http://forums.stangnet.com/attachment.php?s=&postid=1920557
  40. Replies
    8
    Views
    1,244

    This isn't my car although I plan on orderin the...

    This isn't my car although I plan on orderin the kit soon for my own coupe. I've heard good about it, the guy that owns this car said that the install was easy and he had just about everything he...
  41. Replies
    2
    Views
    1,158

    Should i go with 31 spline axles?

    I'm gonna try to build up my rear soon and I'm not sure if I should upgrade to 31 splines or not. My coupe is gonna be mostly street driven under 400horse N/A. I've got an SN95 front 5 lug conv so I...
Results 1 to 41 of 43