Search:

Type: Posts; User: scrape

Search: Search took 0.02 seconds.

  1. Replies
    8
    Views
    1,124

    TWO STEP

    I LEAVE ON THE 2 STEP, BUT I HAVE THE NITROUS WIRED TO DEACTIVATE WHEN THE TRANS BRAKE IS ON, AS SOON AS THE T BRAKE IS DEACTIVATED THE DOPE IS ON , THIS SEEMS TO BE THE BEST WAY I HAVE FOUND TO WORK...
  2. Replies
    5
    Views
    720

    MALLORY REGULATOR

    GUYS I WOULD STAY AWAY FROM THE MALLORY REGULATOR, I JUST TOOK ONE OFF MY DEDICATED N20 FUEL SYSTEM, BECAUSE OF THE RETURN SIZE REQUIRED TO USE THAT REGULATOR, I WAS HAVING PRESSURE FLUCTUATION WITH...
  3. Replies
    177
    Views
    25,016

    TO MUCH FUEL PRESSURE

    I WOULD FIRST START BY PUTTING AN AIR BLEED LINE FROM THE REGULATOR TO THE CELL #3 IN SIZE WITH A .020 JET IN IT, THAT SHOULD TAKE CARE OF THE PRESSURE CREEP, SECOUND I THINK YOUR WAY TOO FAT ON THE...
  4. Replies
    6
    Views
    707

    BIG BLOCK

    I THINK YOUR GOAL IS VERY ACHEIVABLE, HOW DRIVEABLE DOES THE CAR HAVE TO BE? IF YOU WHANT TO KEEP THE CAR STREETABLE, THEN YOU SHOULD PUT THE GAS ON YOUR CAR, ITS THE BIGGEST BANG FOR THE BUCK,I...
  5. internal balance the motor , that would be the...

    internal balance the motor , that would be the better choice
  6. Thread: drive shaft

    by scrape
    Replies
    2
    Views
    801

    drive shaft

    can any one tell me what length drive shaft i need for a powerglide swap in a 91 coupe with a 8.8
    thanks for the in fo in advance
  7. Thread: Tune Up Help

    by scrape
    Replies
    2
    Views
    749

    Tune Up Help

    NEED SOME ADVICE, I HAVE A 400 INCH WINDSOR, TFS R HEADS, 13-1,SUPER VICTOR, AND A 950 HP, WITH A FOGGER, I CURRENTLY HAVE A 30 JET IN THE N20 SIDE AND A 28 IN THE FUEL SIDE, I RUN THE FUEL PRESSURE...
  8. Replies
    7
    Views
    1,597

    svo block

    dont get me started on this subject, last season i purchased a w351 svo block which i bored to 4.125, which the block should have been able to handle with no problem according to the sonic testing...
  9. Replies
    0
    Views
    490

    Cracked Cylinder

    I HAVE A W351 BLOCK THAT CRACKED BETWEEN CYLINDER 5 AND 6, BUT THE PISTON IS FINE, THE RING PACKAGE IS FINE AL SO, THERE IS NO OTHER DAMAGE OTHER THAN THIS, I HAD THE RINGS GAPPED AT .28/.28 FOR NOS...
  10. Replies
    3
    Views
    717

    Tfs R Head Cracking

    HAVE ANY OF YOU GUYS OUT THERE HAD ANY PROBLEMS WITH THE TFS R HEADS CRACKING AROUND THE PLUG, IF SO PLEASE LET ME KNOW UNDER WHAT CONDITIONS IT HAPPENED UNDER, I.E COMPRESSION, HORSEPOWER, NITROUS...
  11. Replies
    0
    Views
    405

    Head Bolt Thread

    I JUST PICKED UP MY W351 BLOCK FROM THE MACHINE SHOP AND WAS PUTTING IT TOGETHER, I PUT ALL OF MY HEAD STUDS IN THE BLOCK BY HAND , AS I WAS TORQUERING THE HEADS DOWN, IT STARTING PULLING THE...
  12. Thread: Ring Gap

    by scrape
    Replies
    1
    Views
    523

    Ring Gap

    OK GUYS LETS GET SOME FEED BACK HERE, I NEED TO KNOW WHAT YOU ALL THINK ON RING GAP ON A NITROUS MOTOR, THE MOTOR IS A 4.125 BORE, FLAT TOP MOTOR, 13.7-1 WITH MY CYLINDER HEADS, CP NITROUS PISTONS...
  13. Thread: Tap

    by scrape
    Replies
    1
    Views
    597

    Tap

    GUYS I NEED TO KNOW WHAT SIZE TAP I NEED TO INSTALL NOS FOGGER NOZZELS, NOS SAYS ITS A 1/16 NPT, BUT I CANT FIND ANYONE WHO MAKES ANYTHING IN THIS SIZE
    THANKS FOR THE...
  14. Replies
    2
    Views
    590

    RING

    CALL ADAM AT PRO POWER , THEY SHOULD OFFER THEM IN C&A IN SEVERAL DIFFERENT MATERIALS AND WIDTHS
  15. Replies
    0
    Views
    465

    351 W Oil Line Size

    CAN ANY ONE TELL ME WHAT SIZE LINES I NEDD TO RUN FROM THE BLOCK TO THE OIL FILTER BASE AND BACK ON A W351 BLOCK
    THANKS FOR THE INFO
  16. Replies
    1
    Views
    610

    Rod Journal Size

    CAN ANY ONE TELL ME WHAT THE FACTORY ROD JOURNAL SIZE IS ON A STOCK 351W THANKS FOR THE HELP
  17. Thread: Nos

    by scrape
    Replies
    4
    Views
    1,020

    IS THE KIT COMPLETE AND DO YOU HAVE PICS E MAIL...

    IS THE KIT COMPLETE AND DO YOU HAVE PICS E MAIL ME BACK AT CSCMOTORSPORTS@YAHOO.COM
    THANKS JASON
  18. Thread: lentz rods

    by scrape
    Replies
    1
    Views
    1,060

    lentz rods

    HAS ANYONE EVER HEARD OF LENTS RODS, ARE THEY WORTH THE MONEY, ANY INFO WOULD BE GREAT, THANKS
  19. Replies
    9
    Views
    1,747

    stroker

    THANKS FOR THE INFO
    SCRAPE
  20. Replies
    9
    Views
    1,747

    what size windsor

    OK GUYS, HERES THE QUESTION FOR YOU HOT STREET AND OUTLAW RACERS. I AM PUTTING TOGETHER A NEW SHORTBLOCK TO GO ALONG WITH MY NEW HEADS, TO DO A LITTLE OUTLAW 10.5 RACING , I AM HAVING TEA WORK A SET...
  21. Thread: MSD problems!

    by scrape
    Replies
    4
    Views
    1,531

    digital 6 is a good box if you have the gas on...

    digital 6 is a good box if you have the gas on your car, due to the retard function and the two step function, i used it on my car with the gas , never had any problems with it ,there well worth the...
  22. Replies
    2
    Views
    1,132

    try a 92 or 93 scrape.

    try a 92 or 93
    scrape.
  23. shifting

    do you have a two step on the car? if so you might what to check to make sure the trigger wire for the shifter isnt some how wired to it, when you activate the low side chip to stage it might be...
  24. Thread: pinion angle

    by scrape
    Replies
    4
    Views
    2,225

    thanks

    thanks for the info it was a big help, i think i narrowed iy down to the converter being to tight we will see
  25. Thread: pinion angle

    by scrape
    Replies
    4
    Views
    2,225

    pinion angle

    can anybody give some advice on pinion angle settings, i have a 92 coupe with complete wolf race craft suspension including sway bar, i have it currently set at six degrees, i run on 28x12.50 et...
  26. Thread: 351 block

    by scrape
    Replies
    6
    Views
    1,579

    thanx

    thanx for the info peepaw
  27. Thread: 351 block

    by scrape
    Replies
    6
    Views
    1,579

    351 block

    can anyone out there tell me how much horsepower a d351 block can handle, i whant to put the trigger back on the motor, the motor is 12 to 1 aluminum roded. thanx for any info
Results 1 to 27 of 27